The wall tiles and wall linings have been removed. The job is
ready to measure for the "made to measure" PVC shower tray.
- Mark a level line around the walls at a height above 150mm (6�) from
the floor and approximately 50mm (2�) below the next highest tile joint.
- Use a small angle grinder with a 110 millimeter diamond blade. Cut through the wall
tile and the wall lining in one action.
- Make sure when you cut with the grinder, you wear personal protective equipment
such as a dust mask, eye and ear protection and gloves.
- You will need to have your made to measure PVC shower tray ordered and delivered before you can continue with the work.
|
|
